How to Replace a Kia Sportage Replacement Key
For many Kia models, the key contains a built-in keyless entry system. This key is similar to a remote control, and is exchangeable by an Kia dealer.
Key fobs may stop working due to a number of reasons, such as batteries that are dead, worn-out buttons signals, signal interference or water damage. Here are some suggestions on how to get your Kia Sportage replacement key back to working.
How to replace the remote Key Fob Replacement Kia; Www.Longisland.Com, or smartkey
The battery in your Kia’s intelligent key will eventually require to be replaced, whether it’s a remote key, a push-to-start key fob kia sorento or a regular metal key that doesn’t have a transponder. This is particularly true if your car displays a message telling you that the smart or remote keys aren’t powered.
It’s a relatively simple process. To replace the battery in the key fob take the mechanical key from the slit in the back of the key fob and remove the cover. A small screw will be inside the key fob, which holds the battery in place. Remove the old battery by unscrewing the screw using a small screwdriver. Then, you can insert the new battery and close the hole in the key fob.
Test the key fob by pressing the lock and unlock buttons. If the doors lock and unlock exactly as you expect, then you’re set! You can now use the hands-free feature to lock and unlock your Kia whenever your fingers become cold or you have to go on errands around Brandon.
Not all keys may require to be programmed (transponder chips or smart keys). This requires a special programming machine that only the dealer or automotive locksmith has access to. Other keys (non transponder keys made of steel) do not require programming. If your key needs to be reprogrammed, then you must be aware of the number printed on the key code tag and then record the number in a secure place.
How do I replace a battery
If the Kia key fob doesn’t respond to pressing the lock or unlock button, it is most likely that the battery is not fully charged. A low battery could cause other issues such as the check engine light flashing on or the engine not cranking. It is easy to replace the key fob battery with just two tools.
Before you begin ensure that your vehicle is turned off and that all doors are closed. Find the small, metal or plastic piece at the bottom of your key fob, and move it until a metal key slips out. You can then insert this key into the handle of the door for the driver to unlock your car.
To replace the key fob battery, remove the cover on the rear and use a plastic bar tool to release the latch that holds the black negative battery cable. Remove the old battery, and then align the new battery so that the “+” positive side faces your face and the “-” negative side is facing towards the fob’s metal electrical contacts. Avoid using excessive force when pushing the new CR2032 into position to avoid damage or bending the metal contacts.
Once the new battery has been installed after which you turn the key fob off and then turn it on in the ignition until the door locks. Then you can test your Kia key fob to check whether it’s working again.
How do I replace a smart keys
Depending on the model of your Kia Sportage, you may have a standard key fob or a smart key. The smart key has an embedded mechanical key blade, however, the standard key fob does not. Both kinds of key fobs come with batteries that will eventually need to be replaced. It’s an easy process that will take about two minutes.
Be sure to turn off your Kia and stand on a flat or well-lit surface prior to when you begin. Remember that the fob can contain tiny pieces that could be thrown off should you not be careful.
The first step is to find the small release button that is located on the back of the lower part of the fob. It could be a circular silver button or a rectangular slot. Once you press this the mechanical key blade will come out and you will be able to open the key fob.
Once you have the key fob opened then you can take out the old battery and replace it. The new battery is a C2032, and can be bought from a local or online auto parts shop. After installation it should be possible to lock, unlock and start your vehicle using your key fob – even if your engine isn’t running!
How to replace a mechanical key
The Kia keyfob is an excellent convenience that lets us lock or unlock our car by pressing the button. Like any device like a key fob, the Kia might have issues. There are steps to take to solve these issues and ensure that our key fobs are in good working condition in the long run.
One of the most common problems is a low or dead battery. This could cause the fob to cease working or to work intermittently. If this is what you are experiencing you should replace the battery an entirely new battery.
If this doesn’t fix the issue, try using a standard flathead screwdriver to wedge open the fob’s plastic casing. Be careful not to damage internal components or scratch the plastic. When the battery is open, carefully take off the old battery and replace it with a new one.
When the new battery is in, close and then open the doors with the mechanical key (every key fob in the kia has an emergency mechanical key that will fit in the slot). Test the key fob to verify that it’s working correctly. If the key fob isn’t working, contact a dealer or locksmith to resolve the issue. To avoid lockouts in the future, ensure you have an emergency key that can work on all trunk and door cylinders.
