Repairs to uPVC Windows
upvc window repair near me is a great choice for modern homes. They are durable, long-lasting and easy to maintain. They do not get rotten or rusty like timber and aluminum.
It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and improve the efficiency of energy.
1. Broken Glass
The broken glass in your windows could cause serious damage to your home and even be fatal. It is essential to make sure that your windows are in good shape.
For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. However when you have double-pane windows that are held in place by internal beading, it’ll be more difficult to get rid of the existing panes and install new ones. In this instance, you will need to locate some plastic spacers that assist the new pane to fit correctly into the window frame.
Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window repair panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled.
Once the glass has been removed and the glass is removed, it’s a good idea to seal the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and fix the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, since this will offer the best of both worlds.
2. Sagging
Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could be affected by a variety of issues, including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from getting worse.
Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you’ll need open the window to access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you have moved your hinges. If you’re satisfied with the size of the window, tighten the screws to hold them in the right position.
If you are unable to reposition the hinges, you might require replacing the seal. Rubber seals can dry out and lose their elasticity with time, leading them to lose their tightness. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.
uPVC handles may also loosen. The majority of the time this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Luckily, it’s not difficult to repair the loose uPVC window handle yourself. First, you’ll need to close your window and do a test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn’t you can use a screwdriver to loosen up the handle. Then, turn the mechanism into position.
3. Water Leaks
It is important to act if you awake each day to discover mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.
This is a relatively easy fix and should be undertaken by any DIY expert. Depending on how severe the issue is, old caulking may have to be removed. It is essential to keep in mind that when it is about upvc window repairs (you can try here), you should avoid the temptation to “over-caulk in order to make the area harder to clean and could reduce your energy efficiency.
Check that any drainage holes have no debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.
Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread throughout the home.
If the leakage occurs between the double-glazed glass it is more likely the problem is with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or are loose and blow open in a breeze, it may be hinges that are at the fault. They can be easily replaced by any competent DIYer and can usually be completed in a matter of minutes.
Like any mechanical component hinges are prone to be damaged over time. It is very easy to replace a hinge on a window, but it’s easier if someone else helps you to hold the frame.
Check that the uPVC hinges open and close in the proper direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should be opened.
Faulty window hinges can be caused by incorrectly opening the window a certain way or by poor installation at the factory. This can often be resolved by sending us a photograph via our website and we will be happy to give you suggestions.
Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.
5. Draughts
Draughts in windows made of upvc can be caused by a few various factors. The hinges can also become misaligned due to wear, creating an opening between the frame and sash. These can be easily repaired by giving them good clean, but in the event that they are beyond repair it could be necessary to have them realigned or replaced. In addition, the interlock could be disaligned. This happens on the hinge side and may need to be cleaned. In some cases, it may be necessary to replace the hinges.
The next common reason for draughts are the window seals. They are prone to wear or damaged over time and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen draughts.
Lastly, one of the most effective ways to reduce draughts is by using an draught excluder. These are usually fabric tubes filled with some kind of filler. They can be positioned on the windowsill on top. They can help stop cold air from entering and keep your home warm and cozy!
With a little regular maintenance and repair, your upvc windows will provide excellent insulation and security for your home. It is crucial to keep in mind that all windows eventually become worn out, and it may be more cost-effective to simply replace them instead of fixing them. So, if you’re having issues with your upvc windows, it is recommended to seek help from a professional as soon as possible.
